Alarm Sensors

Sounds

Attachment

Communications

Power

• Vibration
  
• Door Contact (up to 3/8” gap, tamper-resistant hall cell design)
  
• Tamper
  
• Low Temperature
  
• High Temperature

• Alarm Siren
  
• Arm/Disarm
  
• Paging
  
• Power Connected/Lost

• Built-in magnets
  
• Two mounting holes (#8 clearance)

• Wireless programming and alarms via a CDMA cellular network using SMS & 1xRTT communication protocols

• Internal battery for cordless operation
  
• Battery charger/adapter

Accessories*

Mechanical

Battery

Location Technology

North American Frequency Bands

• Extended Run time, DS505 Using alkaline cells, the runtime is extended by 8 wks.
  
• Indoor Motion Detector, DS510 Passive Infrared motion sensor for monitoring rooms for intrusion.
  
• 12V/24V permanent power adapter

Size
CM: 11.2 x 8.9 x 3.3 IN: 4.4 x 3.5 x 1.3Weight: 250g (8.8oz)

Enclosure

• UV resistant plastic
  
• Rainproof
  
• Crush resistant to >500 lbs
  
• Holding magnets force 14G’s
  
• Vibration: Up to 500Hz random vibration 1.25G rmsTemperature
  
• Operating: -20C to +60C (-4°F to 140°F)
  
• Storage: -40C to +80C (-40°F to 176°F)

• -18C to 50C +/-2C (0F~122F +/- 3.6F)
  
• Humidity: <95% non-condensing

Type
Rechargeable Li-Ion

Size
2x 18650

Runtime
4 weeks **Recharge5 hours **Life: >5 yrs

Designed so that it can be left plugged in for permanent powered applications with out damage to internal battery

Location Technology
Qualcomm gpsOne™

Position Accuracy

• Open sky: 5-10 meters (15 to 30 feet)
  
• Impaired: <20 meters (<60 feet 95% of the time)

Cellular Band

• Rx-869 through 894MHz
  
• Tx-824 through 849MHzPCS

Band

• Rx-1930 through 1990MHz
  
• Tx-1850 through 1910MHz

  GPS Band
  Rx-1575.42 (L1 carrier)

Tampers

Housing

Attachment

Mechanical

Battery

• Door tamper to alarm when door is opened. Enabled/disabled automatically along with mounting tamper.
  
• Mounting Tamper to alarm when DS505 is removed from mounting surface.
  
• Mounting screws protected when door is closed

• Durable UV and impact resistant housing.
  
• Stainless steel & nickel plated hardware for rust resistance.

4 mounting holes with clearance for #8 screw. (screws not included)

Size
CM: 22.9 x 16.5 x 5.8IN: 9.0x 6.5 x 2.3

Weight
684g net1509g with batteries & DS500

Enclosure
Plastic
Rainproof
UV resistant

Temperature
Operating: -20C to +54C (-4°F to 130°F)

Storage: -40C to +80C (-40°F to 176°F)
Remove alkaline batteries for before storage at extreme temperatures

Humidity: <95% non-condensing

Type
Alkaline (non-rechargeable)

Size
D, IEC LR20, ANSI 13A

Cells
Number: 4
Voltage: 1.5v nominal

Output Voltage
6v nominal

Battery Contacts

• Strap & conical spring
  
• Corrosion-resistant nickel plated steel

Run-time

• 8 wks with fully charged DS500
  
• 12 wks with fully charged DS500
  Use only quality batteries for best performance.

Alarm Sensor

Battery & Runtime

Attachment

• Dual element PIR
  
• Up to 50 ft detection range
  
• 90 degree detection angle
  
• Microprocessor running special signal processing algorithm enhances detection performance

• Greater than 1 year with included battery. (Replacement of battery on yearly schedule recommended)
  
• Battery strap to aid in battery removal.
  
• Power for the DS510 is independent and will not affect runtime of the DS500 MOBILELOCK.

• Middle or corner wall mount
  
• Mounting holes (#8 clearance)
  
• Dual purpose removal tamperTamper is activated when DS500 is removed from the DS510 and when the DS510 is removed from its mounting surface

Mechanical

Battery

Charge Port

Size
CM: 23.6 x 13.7 x 6.4 cm
IN: 9.3 x 5.4 x 2.5

Weight
408g net
676g with battery and DS500

Enclosure

• Plastic
  
• Indoor

Temperature
Operating: -20C to +50C
Storage: -40C to +80C

Type
Li-Ion (primary)

Size
CR123

Runtime
1 year

Location
Under door in back of DS510

can be charged or continually powered by the AC adapter

Note: The DS510 will still require yearly battery replacement.

Function

Attachment

Housing

Provide continuous power to the DS500 using construction equipment’s battery Power.

• Four countersunk slotted holes with clearance for #8 screw. (screws not included)
  
• Suitable for mounting in the engine compartment. (not on or next to hot surfaces)

• Rugged and durable cast aluminum.
  
• Resistant to chemicals, fuels, oils, heat and rust.

Cables

Mechanical

Electrical

• Provided with cables, each 10 feet long.
  
• Input cable fused with automotive (ATC/ATO) inline fuse holder and fuse.
  
• Replacements available in most automotive stores.

Size
MM: 127 mm x 50 mm x 25.5 mm
IN: 5.0 in x 1.97 in x 1.0 in

Enclosure

• Unfinished cast aluminum with flanges for mounting
  
• Chemical, hydraulic fluid, fuel, oil and rust resistant
  
• Suitable for mounting in the engine compartment. (not on or next to hot surfaces)

Temperature
Operating:
-20°C to +50°C
(-4°F to +140°F)

Storage:
-40°C to +85°C
(-40°F to +185°F)

Power
Input: 12 V to 24 V (nominal) Automotive

Type sealed lead-acid battery common to construction equipment

Fuses:

• internal - 5 A (non-serviceable)
  
• external inline – 5 A, ATC/ATO type fuse with inline fuse holder on input cable

Output: 4.65 VDC, 300mA, thermally regulated

Cables
Input: 2 conductor stranded 18 AWG

Input fuse: 5 A,, Jacket: parallel TPV (ThermoPlastic Vulcanizate), red – positive, black- negative

Output: 2 conductor stranded 24 AWG, Jacket: black, round TPV with 7-pin MiniDIN connector